|
 |
Marine FirmLock
A smarter way was needed to secure equipment to timber and composite decks and hulls. Now the JEC Marine Firmlock provides an elegant and efficient solution.
Securing equipment to timber decks and hulls can be difficult if you need to remove bolts and replace them from time to time. Traditionally a metal plate would be secured to the timber and equipment bolted to that with problems of trapped water, unnecessary weight and complexity, etc.
With the JEC Marine FirmLock, a 316 stainless steel insert is screwed and epoxied into the timber or fibreglass, leaving a neat ‘SecuraLock’ thread. ‘SecuraLock’ threads accept standard thread bolts without the need for spring washers; so you can use counter-sunk bolts.
You can have complete confidence in a watertight and secure anchor point.
JEC Marine FirmLocks are available in 2 sizes, M8 and M6 with other sizes available on request.
Specifications
Material: 316 stainless steel. (Other materials available on request).
To suit M8 bolts:
Outside thread: M16.
Length: 25mm
Inside thread: M8
Length of thread: 16mm
To suit M6 bolts:
Outside thread: M14.
Length: 20mm
Inside thread: M6
Length of thread: 14mm
JEC Marine FirmLocks have a 4.3mm keyway machined down the outer thread and a bevelled bottom edge to allow excess epoxy to escape the hole.
Phone +61 3 8872 6555 or fill in the form below for more information on the Marine FirmLock - Jindra Energy Conversions.
|
|
|
PDF Specification Sheet